Children can store money in money boxes for certain purposes. Unfortunately, before we accomplish our goal, we may be tempted to spend money on other things. Then, this money box comes in handy.
The majority of Money tin includes a door that we can easily open anytime we want to remove the money.
The terrible part is that this typically implies the box will never be completely filled. This money box, which is made of chequered-plate steel, is simple to fill with coins, but withdrawals are incredibly challenging.
Please be aware that you might need to use a grinder or oxy to extract the cash, suggesting that it may only work with coins and not bills.
How to make a money box
There are many different ways to make a money box using different raw materials but here we will learn to make an indestructible Money Box.
There are many benefits of indestructible Money tins but most importantly we want to make our money safe with it which is a main goal.
Money boxes are a great way for kids to save money for a special purpose.
Unfortunately we can get tempted to spend the money on other things before we have reached our goal. That’s when this money box is useful.
Most money boxes have an opening that allows us to simply take out the money whenever we want. The sad thing about this is that it usually means then box never gets full.
Made from chequer-plate steel, this money box is easy to put coins into, but it’s really really hard to make withdrawals.
Please note that you might need to use a grinder or oxy to get the money out, so perhaps it’s only for coins, not banknotes.
As said earlier in this article we will be making Money tins with steel chequered plates and the procedure is given here below:
Step 1: Supplies You’ll Need
- Metal plate whatever you can get your hands on. While still heavy enough to facilitate welding, it should be manageable to work on.
- Marking and measuring equipment Ink and paper.
- Anything with which to cut. I employed a grinder.
- A grinding tool with an angle.
- A welder I have a MIG, which is fortunate. It’s excellent.
- Also useful may be a hammer.
Step 2: Actions
You just need six square sides to build a cube. If you have enough steel, you can use a single form to create a cube by folding it. Thus, some cutting and welding will be avoided.
- Make the necessary steel forms by tracing them.
- Remove the steel.
- Sharpen the edges by grinding them.
- The cube should be put together and nailed.
- Weld every joint.
- Grinder the welds to make them clean.
- To drop coins through, create a slot. Place it in a spot where coins won’t just fall out.
- My steel was a little rusty, so I used a wire brush to clean it up a little.
Step 3: Additional Options
As you can see, I created a variety of forms.
Two openings have been made to the smaller cube. You can clearly see where I repaired it.
There’s also another way to manufacture an indestructible money box which as shown below:
Step-1: Cutting: Using a shearing machine, cut the tinplate to the dimensions specified by the drawing to create a can body plate, a can lid, and a can bottom blank.
What You Will Need:
Steel plate. Whatever you can lay your hands on. It should be light enough to work on, but heavy enough to weld easily.
Measuring and marking gear. Tape and chalk.
Something to cut with. I used an angle grinder.
An angle grinder for grinding.
A welder. I’m lucky enough to have a MIG. It’s fantastic.
A hammer also might come in handy.
Step-2: Cut gaps and corners so that there are two layers of sheets on the upper and bottom ends of the can body seam Overlap to assist flanging and sealing. At one end of the rectangular blank, cut the upper and lower corners, and at the other end, cut the upper and lower gaps. A right, pagoda, or obtuse angle may be created when cutting the chamfer; a V-shape or U-shape can be created when cutting the cut.
What to Do:
To make a cube you only need six square sides. If you have enough steel you can cut out a single shape that can be folded to make a cube. That will save some cutting and welding.
Mark out the shapes you need on the steel.
Cut the steel.
Grind the edges so they weld nicely.
Assemble the cube and tack it together.
Weld all joints.
Clean up the welds with a grinder.
Cut a slot to drop coins through. Position it where coins won’t easily come out.
My steel was a bit rusty so I cleaned it a bit wit a wire brush.
Check out this video to see how I did it…
Step-3: To avoid injuries from the sharp edge of the can body, crimping rolls the mouth image of the can body into a tiny arc with the use of a crimping machine.
As you can see I’ve made a few different shapes.
The smaller cube has been opened twice. You can see where I have patched it.
Step-4: End folding: When making tinplate cans, the ends are folded to the front and the side using an end folding machine by hooking the cans together when they are circular.
Step-5: Tinplate cans are made using an end folding machine that folds the ends to the front and the side by hooking the cans collectively while they are circular.
Small children may learn how money works by using a money box as a teaching tool. Young children may not comprehend the notion of money or the value of each coin or note when they first start school.
Parents may use the money box to teach children the value of various coins, such as the penny ($0.01 US Dollars or USD), the nickel ($0.05 USD), and so on, using the American monetary system as an example.
Read More: Online Cake Delivery in Ahmedabad